Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to change ip address s7 1200 plc without using tia poratl

Created by: sandykml at: 12/18/2018 8:26 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/18/2018 8:26 AM	Rate (0)
sandykml Posts: 9 Rating: (0)	hi to everyone i used two s7 1200 plc for master slave modbus communication. but now that slave plc not communicating and not connecting with tia portal. plc not showing in accessible devices. so anyone explain how can i reset ip address or how can i reset that plc without using tia portal. thanks in advance santhosh
sandykml Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

12/18/2018 9:17 AM	Rate (0)
MicTsc Gold Member Joined: 11/16/2012 Last visit: 11/29/2024 Posts: 307 Rating: (52)	You can use SIMATIC Automation Tool to search for your PLC, set/change IP Address, read PLC Diagnostic Data, and many more. But if you don't see the PLC in accessible devices there may be some other problems. Did you power cycle the PLC?
	Last edited by: MicTsc at: 12/18/2018 5:21:00 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on