Hello,

can you specifiy the question exactly?

What do you mean?

Change Safety Parameters in the SINAMICS_Integrated objects ? 
-> Expertlist of the object or the configuration Mask "Safety Integrated" of the object.

Regards

Christoph

????

sorry what would you do?

Which parameters you mean?

If you go with the mouse to a input field in the masks then a tooltip with the parameter is displayed.

Safety Integrated have a lot of parameters and not all needed, depends on the Safety configuration.

So please specify what exactly you would do.

Where and how  you would change the Parameters? (Script, Online/Ffline, Expert list?)

If you click on one of the Sfety Function in the middle of the dialog you get a detailed configuration for the safety configuration with the relevant parameters.

Regards

Chtristoph

Hi,

ok p9659, what the problem?

Enter the value you need, set the checkbox "Copy parameters after download" in the first dialog.

go online , load the new values , finish

or do i understand the topic complete wrong?

Regards

Christoph

Hello,

looks like you offline project and the online data not the same.

Try this:

restore the previous state of the system (no alarm present)

Got online and Upload the configuration from Target to PC

go offline

save the project

change the parameter

download again

Or:

check the parameter p9515, is it different between offline and online?

Regards
Christoph

Hello,

f01650 (1000) is ok because you have changed the Safety settings and must activate this.

On the drive object with the alarm open the safety integrated configuration dialog

then:

Change settings

Copy Parameter

Activate settings.

regards

Christoph