How to change the parameters for the sinamics V20 ?

Hello Sir

I try to change the parameters for the sinamics V20 but it not changed it locked with a passcode (-----)

can you advise me how to change it because the nominal values are not matched

Sherwan Khalid Abdulla

GP SPG REU 4 2 PO-IQ

SAG PE Iraq Baghdad Branch

------------------------------------------------------------------------------------------
Split from Sinamics v20 parametrisation.

Set p0012 value equal to p0011 value, i.e. e.g. if p0011 = 10 set p0012 = 10. After this set p003 i.e. parameter access level value as per parameter access level i.e. p003 = 0 user defined parameters, 1 - standard parameters, 2 - extended i.e. I/O parameters, 3 - Expert parameter, 4 -  service for Siemens only.

HTH