Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to clear SF DP on CPU 315-2-DP

Created by: Elite at: 1/10/2011 4:37 PM (12 Replies)

Rating (1)

Thanks 1

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

12/1/2016 9:51 AM	Rate (0)
Sachinpatke Silver Member Joined: 12/9/2010 Last visit: 10/8/2022 Posts: 623 Rating: (77)	Hi Elite, Your Diagnostics buffer entry 2 shows that OB100 is not found. Insert OB100 in offline program and download to PLC. Also do following: 1. Download empty program in PLC or only hardware confi. and check whether LED is OFF. If still there is LED, problem is with hardware confi. As suggested above, given settings should make LED off.
	If you like the comment, rate it (right top) or thank it (left bottom). One who says he can & one who says he can't, are both correct-Confusius. Automation- C2C, Management Sachin Patke, India.
Suggestion To thank Quote Answer

12/1/2016 10:43 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by 01753200986 is split to a separate thread with the subject Alarm program, horn after every 1 sec when alarm generates. Best regards Min_Moderator

Suggestion To thank Quote Answer

6/12/2017 1:55 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by yyyyyyyyyy is split to a separate thread with the subject 315-2dp, SF fault occurs. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on