Hello All,

I want to Pair a Third party device with Siemens PLC through CP341

The third party device gives me output in 10 Hex value.and i want to take that in My PLC and apply mathematic function on individual Hex value.

How can i do it?

I have attached the values i am getting from a third party device.

Thanks in Advance.

Hello,

normally you need to program something like a handshake. You send a special sequence of signs followed by <CR>. Then you receive a sequence and you need to select your value out of this sequence.

It should be described in the manual.

Regards

In online InstatntDB it is showing TrUe.

But in offline DB when I am going online it is not showing TrUe.

Ya I did the same way.and for communication the baik rate of the third party was the issue and parity.

The value conversation was did as you said.

Thanks.