Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to config and wiring TI545-1102 and Remote Base Controller 505-6851A

Created by: Tortrakoon at: 10/19/2013 3:12 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/19/2013 3:12 PM	Rate (0)
Tortrakoon Posts: 2 Rating: (0)	Dear Sir, In my site use TI545-1102and now I need toextend I/O card by use Remote Base Controller505-6851A. I try to find how to Wiring and configulation in 505WORKSHOP but I can't. Please advice me how to set it. Thanks for your advice.
Tortrakoon Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/21/2013 11:08 AM	Rate (0)
SamTheEagle Bronze-Expert Joined: 2/10/2006 Last visit: 10/8/2024 Posts: 148 Rating: (12)	In PLC Workshop, open your program, in the main menu select PLC Utilities -> PLC Configuration -> click on button I/O Configuration 505 I/O -> select the base and click on button Edit Base... See attached screenshot. Regards, Carlo Attachment IO config.jpg (636 Downloads)

Suggestion To thank Quote Answer

10/21/2013 3:31 PM	Rate (0)
billwest Posts: 510 Rating: (117)	Chapter 5 of the attached 545/555 System Manual has information on the RBC billwest Attachment 5x5sm.pdf (648 Downloads)
billwest Posts: 510 Rating: (117)
Suggestion To thank Quote Answer

10/23/2013 10:56 AM	Rate (0)
Tortrakoon Posts: 2 Rating: (0)	Thanks for your advice Mr.billwest and Mr.SamTheEagle. It's helpfull for me.
Tortrakoon Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on