Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to configure HART communication using ET200m module

Created by: Asanga at: 2/4/2011 7:27 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/4/2011 7:27 PM	Rate (0)
Asanga Regular Member Joined: 2/5/2009 Last visit: 9/24/2023 Posts: 10 Rating: (0)	Dear all, I'm using CPU 315-2PN/DP, ET200m (6ES7-153-2BA02-0XB0), analog module(6Es7-331-7TF01-0AB0)& HART field device Yokogawa Vortex Flow convertor(DYA-E-x-D/ MV). I have to configure this to take Flow rate, Totalizer & Temperature data using 4-20mA HART communication on mono drop mode. I need to know , is Simatic PDM software compulsory for this configuration ? Any body please help me to configure this communication, step by step & if you have any sample program please be kind enough to send me. Regards, Asanga

Suggestion To thank Quote Answer

2/5/2011 4:42 PM	Rate (0)
Asanga Regular Member Joined: 2/5/2009 Last visit: 9/24/2023 Posts: 10 Rating: (0)	Dear Experts, Please help me to configure this. Regards, Asanga.

Suggestion To thank Quote Answer

2/9/2011 4:00 PM	Rate (0)
Simaticus Bronze Member Joined: 1/30/2007 Last visit: 6/3/2022 Posts: 262 Rating: (24)	Hi asanga, sorry to be that late, but i'm available only occasionaly. If you want to parametrize your sensor(s) I don't know any other choice than PDM. For examples pls check manual and faq regarding your analog module. Good luck

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on