Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to configure S7-1500 with Incremental Linear LS187- Heidenhain?

Created by: Hoang Anh at: 3/16/2021 9:46 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/16/2021 9:46 AM	Rate (0)
Hoang Anh Member Joined: 2/21/2020 Last visit: 7/20/2024 Posts: 3 Rating: (0)	Can you introduce me how to configure S7-1500 with Absolute Linear LS187- Heidenhain? ------------------------------------------------------------------------------------------ Split from How to configure a measurement system with EnDat 2.2 on Sinamics S120.
	Last edited by: Jen_Moderator at: 03/16/2021 14:22:44 New subject after splitting Last edited by: Hoang Anh at: 03/20/2021 01:55:12
Suggestion To thank Quote Answer

3/16/2021 9:54 AM	Rate (0)
titanic Member Joined: 3/5/2016 Last visit: 2/14/2023 Posts: 10 Rating: (0)	For Endat 2.2 you need SMC40! SMC20 is good up to Endat 2.1 (needs Incremental tracks also, not only Absolute tracks). That's why you can't configure Endat 2.2 on SMC20. Alex

Suggestion To thank Quote Answer

3/16/2021 10:27 AM	Rate (0)
Hoang Anh Member Joined: 2/21/2020 Last visit: 7/20/2024 Posts: 3 Rating: (0)	Dear I mistake. That is Incremental encoder, not absolute. I tried to find the guide of connect between S7-1500 with encoder but do not have Please help me

Suggestion To thank Quote Answer

3/17/2021 3:34 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 1/17/2025 Posts: 5985 Rating: (823)	Hello, How can you realize the encoder configuration for the “positioning axis” technology object? https://support.industry.siemens.com/cs/ww/en/view/109486133
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on