Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to Connect a CP1430 to a scalance X204-2LD

Created by: iyerm2 at: 4/8/2010 2:59 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/8/2010 2:59 PM	Rate (0)
iyerm2 Posts: 6 Rating: (0)	Hi I need to connect a CP1430 to a X204-2LD scalance. The CP1430 apparently supports both ITP and AUI on the same port, Will I be able to connect the two without using a media converter (ie AUI to UTP).
iyerm2 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

4/8/2010 3:30 PM	Rate (0)
INS Gold Member Joined: 4/6/2006 Last visit: 1/21/2019 Posts: 604 Rating: (56)	Hi, If your CP does support ITP you can use a cable. This should be a IE TP Cord RJ45/15 which can be ordered in several lenghts. A 6 meter long cable can be ordered with: 6XV1850-2LH60
	Best regards, INS
Suggestion To thank Quote Answer

4/9/2010 2:41 AM	Rate (0)
fritz Diamond Expert Joined: 10/7/2005 Last visit: 3/22/2023 Posts: 2962 Rating: (1022)	Hello iyerm2 Just to complement INSadvise, the CP1430 TF does support AUI as well as ITP (automatic switching), so the cable that INSsuggested is all you need(and more can be found HERE).
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on