Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to connect a PLC to Wincc

Created by: away_of_life85 at: 7/14/2008 3:19 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/14/2008 3:19 PM	Rate (0)
away_of_life85 Posts: 2 Rating: (0)	hi all i`m an electrical power student, and i`m doing my graduation project can any one tells me how to connect a LG S80 with Wincc programe plz i want a preif explain from A to Z. thanks alot
away_of_life85 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/14/2008 4:43 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, have you tried this yet? WinCC V7.0 Getting started this document is surely also for V 6 available. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

7/15/2008 7:52 AM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 1/21/2025 Posts: 12330 Rating: (2702)	Hello away_of_life85; I have not worked with an LG S80 PLC, and it is not mentionned in the LG/LS industrial site (possibly an older model?). So to help you out then will need more information. Attached you will find a list of communication "channels" (protocols) supported by WinCC. Note: The S7 Protocol Suite expands into MPI, Profibus, Industrial Ethernet and TCP/IP (for SiemensS7 PLCs). If your PLC supports any of these protocols (your best bet at this time looks like OPC) then provide us with the information and we may be able to discuss details of the connection. Hope this helps, Daniel Chartier Attachment WinCC_ComChannels.jpg (120 Downloads)
	Last edited by: dchartier at: 7/15/2008 7:55 AM
Suggestion To thank Quote Answer

7/16/2008 12:50 AM	Rate (0)
away_of_life85 Posts: 2 Rating: (0)	thanks alot guys for ur help and i will see what i can do
away_of_life85 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on