Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to connect analog output

Created by: Rizlan at: 5/22/2017 5:05 PM (6 Replies)

Rating (0)

Thanks 1

7 Entries

5/22/2017 5:05 PM	Rate (0)
Rizlan Regular Member Joined: 5/22/2017 Last visit: 9/13/2022 Posts: 51 Rating: (1)	Hi, I am using 24DC OBA8 and AM2AQ analog module. i want to controlle Analog Output through temperature sensor which is connected to AI-1,please let me know how can connect Analog Output ?

Suggestion To thank Quote Answer

5/22/2017 5:28 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/11/2024 Posts: 34391 Rating: (4286)	What exactly do you want to do? Would you like to keep a selected setpoint with the measured temperature at AI1 via the analogue output? Or other? Please give us more info.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users mindware

5/23/2017 6:55 AM	Rate (0)
Rizlan Regular Member Joined: 5/22/2017 Last visit: 9/13/2022 Posts: 51 Rating: (1)	Hi, Thanks for the response, yes we ill keep selected set point with the measure temperature and we need switched on Analog output (0-10V) as per the different between set point and temperature.

Suggestion To thank Quote Answer

5/23/2017 7:09 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/11/2024 Posts: 34391 Rating: (4286)	Unfortunately, this is still not a detailed answer. What happens if the setpoint is exceeded or fallen short of? Should the value of the analog output be increased if the setpoint is undershot? Or should the value of the analogue output be reduced if the setpoint is undershot? Would you like to use a PI controller? Or should the value of the analog output be changed linearly?

Suggestion To thank Quote Answer

5/23/2017 7:15 AM	Rate (0)
Rizlan Regular Member Joined: 5/22/2017 Last visit: 9/13/2022 Posts: 51 Rating: (1)	Hi, I dont have idea to connect Analog Output module. can you give me a sample how we can connect Analog Output module on logo comfort FBD

Suggestion To thank Quote Answer

5/23/2017 7:23 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/11/2024 Posts: 34391 Rating: (4286)	There are many ways to connect the analog input to the analog output. Without concrete data, I can not afford any concrete help. Perhaps this page will help you with examples. Among other things, there is a section for examples with analog value processing. Application examples for LOGO!

Suggestion To thank Quote Answer

4/30/2018 10:47 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (173)	New question published by Arsayi is split to a separate thread with the subject how to connect input analog sensor (4-20mA) and logo . Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on