Hello to all,

I am working on a project where i have to connect a S7 300 PLC to a OPC UA Server.

The reason of connection is because i want to read the data from PLC and transfer this data to OPC Ua Server

And my PLC dont have ethernet port , just MPI port is there.

Any suggestion from your side.

Please help

best regards

Sam

ssamber

Hello to all,

I am working on a project where i have to connect a S7 300 PLC to a OPC UA Server.

The reason of connection is because i want to read the data from PLC and transfer this data to OPC Ua Server

And my PLC dont have ethernet port , just MPI port is there.

Any suggestion from your side.

Please help

best regards

Sam

 

 Hi,

You can Add an Ethernet module

Regards

Check this one:

https://www.ibhsoftec.com/epages/63444704.sf/en_GB/?ObjectPath=/Shops/63444704/Products/1180

Regards

Hello ssamber

If you use a Communication Processor for DP/MPI on the PC where you want to run the OPC Server then you also can use the Simatic Net OPC Server. Here its also possible to get access to the PLC over MPI/Profibus.

But then all the OPC Communication (OPC Server <-> OPC Client) can only be used with Ethernet.

Bye Murof