Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to connect to a Siemens SINAMICS S120 using the Ethernet-cable

Created by: dodoqian at: 2/16/2010 1:35 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

2/16/2010 1:35 PM	Rate (0)
dodoqian Posts: 22 Rating: (0)	Dear all, we want to build a connection between a Siemens Sinamics S120 CU320 and our PC. We have tested that with the COM-Port in CU320 with RS232-cable. It worked perfect. And now we want to connect to CU320 with the Ethernet-cabel. We don't have CBE20. Is it possible to connect to CU320 using the Ethernet-cable without any additional part. with regards, Leo
dodoqian Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

2/16/2010 2:27 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/3/2023 Posts: 21220 Rating: (2798)	Hello, "Is it possible to connect to CU320 using the Ethernet-cable without any additional part?" no, there is no way. Only the new CU320-2 have a onboard Ethernet Interface. Regards Christoph

Suggestion To thank Quote Answer

2/18/2010 9:57 AM	Rate (0)
dodoqian Posts: 22 Rating: (0)	Dear ChristophD, thank you for your help. There are four Ethernet-ports on our CU320. But we are not sure, if we have CBE20 or not. I upload a photo for our CU320, could you try to recognize if the CBE20 exist or not. regards Leo Attachment CU320.JPG (286 Downloads)
dodoqian Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

2/18/2010 1:15 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/3/2023 Posts: 21220 Rating: (2798)	Hello, this are the DRIVECLiQ Ports, no IE Ports. Regards Christoph

Suggestion To thank Quote Answer

2/18/2010 1:29 PM	Rate (0)
dodoqian Posts: 22 Rating: (0)	Dear ChristophD, Thank you for your reply. It's very helpful. regards Leo
dodoqian Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on