Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to control servo?

Created by: Abbas Barbhaya at: 12/7/2011 1:44 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/7/2011 1:44 PM	Rate (0)
Abbas Barbhaya Posts: 21 Rating: (0)	m new in s7 1200 seriese. so i don't know how to control servo... i have two cpu one is 1214c and one is 1212c..... and i have control servo both cpu.... so please help me...
Abbas Barbhaya Posts: 21 Rating: (0)	Last edited by: O_Moderator at: 12/8/2011 10:01 AM new subject after splitting from /tf/WW/en/Posts/51891#top
Suggestion To thank

12/7/2011 2:22 PM	Rate (0)
Marko Bursic Platinum Member Joined: 9/8/2009 Last visit: 1/20/2023 Posts: 1410 Rating: (145)	but what interface those servo have? control by analog value (speed, torque), dir/step pulses, profibus, profinet,.....? what those servos have to do: postioning task, velocity control, torque control?
	Last edited by: Marko Bursic at: 12/7/2011 2:23 PM
Suggestion To thank

12/8/2011 10:02 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 1/20/2023 Posts: 2685 Rating: (135)	Thread closed, because question is already discussed in the following thread controling servo in s7 1200? Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on