Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to convert TP1200 for IPC677D 15 "professional version?

Created by: rdoliveira at: 6/28/2016 4:42 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

6/28/2016 4:42 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 10/2/2024 Posts: 1555 Rating: (168)	when I try to change the device, TIA changes to Advanced. I want to use the Professional version. I have a project in TIA version v13 SP1 upd8 an HMI TP1200. I want to convert to a IPC677D 15 "is possible? Is it possible to convert directly.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

6/29/2016 1:18 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 10/2/2024 Posts: 1555 Rating: (168)
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

6/29/2016 7:21 PM	Rate (0)
rdoliveira Gold Member Joined: 4/26/2012 Last visit: 10/2/2024 Posts: 1555 Rating: (168)
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

6/30/2016 9:35 AM	Rate (0)
xnor Bronze Member Joined: 10/18/2012 Last visit: 8/21/2024 Posts: 225 Rating: (23)	Hello rdoliveira, as far as I know TP1200 includes Runtime Advanced. You can convert TP1200 into IPC677D 15" directly. What you will get from this is an IPC with RT-Advanced Project. The only way I know to convert from RT Advanced to RT Professional is step by step with copy paste of all the pictures, variables, and other parts of the project. Therefore you need a second IPC that contains your desired RT Professional. Maybe someone in the Visualization forum knows a better way. You should ask there. Visualization -> SIMATIC WinCC (TIA Portal). regards, xnor

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users rdoliveira

|

Share this page:

Share this page on...

Follow us on