Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to copy all settings and files from one 810 to another

Created by: Jeff Shaffer at: 11/17/2007 6:16 PM (3 Replies)

Rating (2)

Thanks 0

4 Entries

11/17/2007 6:16 PM	Rate (0)
Jeff Shaffer Regular Member Joined: 10/31/2007 Last visit: 1/21/2025 Posts: 7 Rating: (0)	I have been working on the PLC program in a 810m for a few days now. When I came in this morning the810 booted up to the germen inital clear screen. I am thinking that maybe the batteys went dead on me. I have another mahcine identical to this one and a new PG M with the s5 software on it. I need to know how to go about pulling the files (other then PLC) from the working machineand to the one that needs to be reloaded. I have read the publication out about how to load the files from disk but how would I go about geting them from the working mahcine. Thanks Jeff

Suggestion To thank Quote Answer

11/18/2007 11:04 PM	Rate (2)
atharva Bronze Member Joined: 2/27/2007 Last visit: 3/30/2022 Posts: 79 Rating: (5)	Hi Jeff I think this 810M giving much trouble to you but its OK this all are common things comes under maintenance. Start Setting data----- Setting bits 5010 0000 0000 For RS232 data transfer(NO PLC) 5011 1100 0100 data transmit last 0100 baudrate 1200 5013 1100 0100data receive 5016 0010 1000 5017 0000 0010 this is the all seting required. If you go into Initial clear mode screen then this screen comes under Data IN/OUT (NO setting data softkey) Then go to screen data out and select one by option and you will get all data to your PG Use same RS232 cable which you used for STEP5. And load the same data into your machine which is under breakdown. You cannoot get alarm text file from 810 ga1 systems you have to write it or if you have previous backup then it is possible to transfer. While loading the data into 2nd machine(breakdoen one) clear all part program NC PLC data alarm text file otherwise you will not able to load the part program. i think this will help you. Be causious while taking backup from working machine. Is the I/O are same for both machine then and then only PLC program will work propely othewise you have to load it from EPROM of same machine. You can found a manual in this website also. thanks Atharva

Suggestion To thank Quote Answer

11/20/2007 1:43 PM	Rate (0)
Jeff Shaffer Regular Member Joined: 10/31/2007 Last visit: 1/21/2025 Posts: 7 Rating: (0)	Thanks for all the great information. I just found out that for some reason we no longer have PCIN so I am working on that now. I wanted to know if It is posible to copy directly from one machine to another. Also I see that this machine has a UMS card in it but when I select load from UMS, I will not select the option on the screen. Is there something that I am missing here? Thanks again Jeff

Suggestion To thank Quote Answer

7/14/2008 10:17 AM	Rate (0)
Skyliner Posts: 5 Rating: (0)	change NC-MD 5015 to 01010000
Skyliner Posts: 5 Rating: (0)	Last edited by: Skyliner at: 7/14/2008 10:17 AM Last edited by: Skyliner at: 7/14/2008 10:17 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on