Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to create a datablock with TIA Portal V13 tool

Created by: make_it_move at: 6/7/2014 3:49 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

6/7/2014 3:49 PM	Rate (0)
make_it_move Posts: 25 Rating: (1)	Hi, How can I create a datablock in the TIA portal V13 tools and fill it with some variables. I feel stupid but I can not find the way to do that. Searched this forum and did read a lot of stuff. But no clue.
make_it_move Posts: 25 Rating: (1)
Suggestion To thank Quote Answer

6/7/2014 4:40 PM	Rate (1)
William_B Posts: 5225 Rating: (1198)	well.. you create a global datablock as if it is an FB. See the JPG for a clue. w Attachment Visual clue_Create a global datablock.jpg (232 Downloads)
William_B Posts: 5225 Rating: (1198)
Suggestion To thank Quote Answer

6/7/2014 6:38 PM	Rate (0)
make_it_move Posts: 25 Rating: (1)	Hmmm, didn't expect that under the program blocks. But still feel stupid about it. Thanks
make_it_move Posts: 25 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on