Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to create a emf file for each pages of project

Created by: Bobco at: 12/7/2010 11:31 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/7/2010 11:31 AM	Rate (0)
Bobco Regular Member Joined: 12/2/2009 Last visit: 1/24/2025 Posts: 41 Rating: (0)	Hello guys. I need to produce "user guide" for my MP277 panel. Since some time ago, I was able to create an .emf for each page of my project. The procedure is described in the help: start print documentation and stop it before the end*. Since I installed the SP2 of WinCC flexible 2008 I'm not yet able to do it. The alternative is to make a hard copy of each page, past it into Paint.exe, cut it and past in a Word document. Some body knows how to create emf files? Thanks in advance.

Suggestion To thank Quote Answer

12/7/2010 2:28 PM	Rate (0)
tyro Posts: 9 Rating: (0)	I dont know how to create .emf files but check out the following page to getscreen shotsof all screens in a few clicks: https://support.automation.siemens.com/WW/llisapi.dll/38043669?func=ll&objId=38043670&objAction=csView&nodeid0=16502685&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=treecontent
tyro Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on