Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to create OB's in PCS7

Created by: meyme at: 11/20/2007 3:23 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/20/2007 3:23 PM	Rate (0)
meyme Posts: 3 Rating: (0)	Hello. I need your help about PCS7 V 7.0 if it could be possible. I have a 416-3DP with many Profibus DP Slaves (115), and my problem is that when I compile, PCS7 only debuges OB35, but I need the Start OB and OB1, and someones like the I/O fault OB's. In a similar project all necesary OB are generated and i.e. diagnostics control of Profibus DP slaves are implemented automatically in CFC's with @ name. (@(1), @(2), etc.) Thank You.
meyme Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

11/20/2007 6:48 PM	Rate (0)
Mario Braganca Posts: 124 Rating: (17)	You must edit the runtime groups in CFC and compile them with the option Generate Module Drivers.
Mario Braganca Posts: 124 Rating: (17)	Last edited by: Mario Bragança at: 20.11.2007 18:49
Suggestion To thank Quote Answer

11/20/2007 7:36 PM	Rate (0)
meyme Posts: 3 Rating: (0)	The problem was in the libraries. Now it works. Thanks.
meyme Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on