Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to detect a modul failer of an ET200S within the DP-Master

Created by: Andy_Deris at: 2/29/2008 11:08 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/29/2008 11:08 AM	Rate (0)
Andy_Deris Posts: 1 Rating: (0)	Hello, I have a system PCS7 with a CPU 417- 4 and many ET200S connected, in each ET200S there are many port DI/DO/AI and PM Power Modules.The modules DI and DO don't have diagnostic butI would like to Know when a specific Module fail in specially PM (Fuse detected and Lost Voltage), I can detect this one, for to show alarm in a Wincc.I need a exampleto do this. Thanks for your help.....
Andy_Deris Posts: 1 Rating: (0)
Suggestion To thank

2/29/2008 4:00 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 5/24/2023 Posts: 4099 Rating: (192)	closed cause question published twice. The second thread with the subject Question - How to detect a modul failer of an ET200M within the DP-Masteris published within the same conference. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on