Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to fix a siemen pt100 sensor?

Created by: AutoGen_5085234 at: 4/11/2024 1:03 PM (8 Replies)

Rating (0)

Thanks 1

9 Entries

4/11/2024 1:03 PM	Rate (0)
AutoGen_5085234 Joined: 12/15/2023 Last visit: 5/28/2024 Posts: 58 Rating: (0)	hello i found this reference :QAD2010 and I would like to understand how the sensor is attached. I saw on the doc that there is a kind of bar but I don't understand how to fix it (and I don't see the diameter of the hole) I'm asking this because I would like to know if I can use another binding thank you
	Last edited by: AutoGen_5085234 at: 04/11/2024 13:04:12 Last edited by: Jen_Moderator at: 04/12/2024 06:49:02 Text formatting optimized.
Suggestion To thank Quote Answer

4/11/2024 1:18 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 10/8/2024 Posts: 33900 Rating: (4216)	1.) What has to do with LOGO! hardware? 2.) I don't understand your question.

Suggestion To thank Quote Answer

4/11/2024 1:25 PM	Rate (0)
AutoGen_5085234 Joined: 12/15/2023 Last visit: 5/28/2024 Posts: 58 Rating: (0)	hello ardwaire is for physical elements, right? and my question concerns the means of fixing the sensor for which I gave the ref
	Last edited by: Jen_Moderator at: 04/12/2024 06:50:05 Text formatting optimized.
Suggestion To thank Quote Answer

4/11/2024 1:29 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 10/8/2024 Posts: 33900 Rating: (4216)	AutoGen_5085234 hello ardwaire is for physical elements, right? No. LOGO! hardware means: - LOGO! base modules - LOGO! expansions modules - LOGO! CMR - LOGO! CSM switch - LOGO! CIM module etc.

Suggestion To thank Quote Answer

4/11/2024 1:44 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 10/8/2024 Posts: 33900 Rating: (4216)	I only found a German manual. Take a look at page 4. Attachment 9903_Anlegetemperaturfuehler QAD2.. FA-T1G_de.pdf (251 Downloads)

Suggestion To thank Quote Answer

4/11/2024 2:04 PM	Rate (0)
AutoGen_5085234 Joined: 12/15/2023 Last visit: 5/28/2024 Posts: 58 Rating: (0)	thank you but I don't understand where the dimensions are for the bar which is attached to the sensor (the dimensions of the place where it is screwed and the diameter of the holes)
	Last edited by: Jen_Moderator at: 04/12/2024 06:52:02 Text formatting optimized.
Suggestion To thank Quote Answer

4/11/2024 2:12 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 10/8/2024 Posts: 33900 Rating: (4216)	Have you see also page 6?

Suggestion To thank Quote Answer

4/11/2024 2:18 PM	Rate (0)
AutoGen_5085234 Joined: 12/15/2023 Last visit: 5/28/2024 Posts: 58 Rating: (0)	yes I saw this document before coming to ask for help here but I do not see on the part with the quotations the quotations of the bar(on yealow) Attachment image_2024-04-11_161841983.png (130 Downloads)
	Last edited by: Jen_Moderator at: 04/12/2024 06:52:37 Text formatting optimized.
Suggestion To thank Quote Answer

4/11/2024 2:25 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 10/8/2024 Posts: 33900 Rating: (4216)	The tension band is for pipes with a diameter from 15 mm up to 140 mm. Don't you see this in the sketch?

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_5085234

|

Share this page:

Share this page on...

Follow us on