Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to go back in the first Setup for IOT 2050 1YA2 FS:02

Created by: JPXluke at: 2/18/2022 1:37 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/18/2022 1:37 PM	Rate (0)
JPXluke Member Joined: 6/2/2016 Last visit: 6/21/2022 Posts: 6 Rating: (0)	I did the first setup of the IOT2050 and I ended up not selecting node-RED. I needed to know how to redo the setup or how to enable Node-RED. Attachment MicrosoftTeams-image (3).png (50 Downloads)

Suggestion To thank Quote Answer

2/18/2022 1:45 PM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 8/11/2022 Posts: 2897 Rating: (351)	Hi, please follow chapter 3.2 in the PDF attached to this entry. You need the Service Stick, as the sources are only the stick. Unfortunately I still can't open my private messages, so you can't write your email address to me, which I need to provide the stick. Best regards!
	Out of office until Thursday, August 11th
Suggestion To thank Quote Answer

2/18/2022 2:29 PM	Rate (0)
JPXluke Member Joined: 6/2/2016 Last visit: 6/21/2022 Posts: 6 Rating: (0)	[snip] or [snip]
	Last edited by: Jen_Moderator at: 02/21/2022 08:51:37 Removed E-Mail address.
Suggestion To thank Quote Answer

2/18/2022 2:48 PM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 8/11/2022 Posts: 2897 Rating: (351)	Hi, I provided you with the download link of V2.2. You can either update the system or use it only for installing node-red. Best regards!
	Out of office until Thursday, August 11th
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2050 Industrial OS

Follow us on