Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to integrate SIMATIC 200 Station with CP 243-1 into Net Pro of Simatic Manager

Created by: manassas at: 4/3/2006 7:52 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/3/2006 7:52 PM	Rate (0)
manassas Posts: 51 Rating: (0)	Hi, I have a S7226 with 243 ethernet modul and WinCC RT on a PC and S7314 with 343-1 ethernet modul. I am succesful to make a connectionbetween S7314 and WinCC RT on PC using Simatic manager program to program both WinCC RT and S7300. I integrated them into one project. Now I am trying to integrate SIMATIC 200 Station(1) into Simatic Manager and I am succesfull but simatic manager's net pro does not recognize S7200 Ethernet modul whic is CP243-1. How can I make them happen that simatic manager'a net pro recognize CP243-1 of S7226 then I can connect it ethernet connection in Net Pro. (How to integrate SIMATIC 200 Station with CP 243-1 into Net Pro of Simatic Manager ) Thx for advance
manassas Posts: 51 Rating: (0)
Suggestion To thank

4/4/2006 11:10 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 5/24/2023 Posts: 4099 Rating: (192)	Closed: cause topic posted twice. Here you will find the second topic with is replied: How to integrate SIMATIC 200 Station with CP 243-1 into Net Pro of Simatic Manager in the conference Communication / Networks
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on