Navigation

How to know the version of cu or pm on the actual and on the memory card?

Created by: AutoGen_6778994 at: 4/1/2024 9:08 AM (1 Replies)

4/1/2024 9:08 AM	Rate (0)
AutoGen_6778994 Member Joined: 2/15/2022 Last visit: 10/31/2024 Posts: 3 Rating: (0)	Hi, [snip] How to know the version of cu or pm on the actual and on the memory card? ------------------------------------------------------------------------------------------ Split from Fault F07815 - Cannot find parameter p201 or r200 in starter.
	Last edited by: Jen_Moderator at: 04/02/2024 08:14:58 New subject after splitting. Division of questions into separate topics.
Suggestion To thank Quote Answer

4/2/2024 2:20 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/5/2024 Posts: 5960 Rating: (820)	Hello AutoGen_6778994, you can see the actual firmware version in parameter r0018. On the CF card you can find “content.txt” file, where you can find the firmware version. https://support.industry.siemens.com/cs/ww/en/view/45840329 Regarding parameter p0200, make sure you are on drive expert list, not control unit and you have the right access level, otherwise you just gonna see the corresponding parameters.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer