Navigation

How to link the iot2050 to the Internet and to the PLC?

Created by: Abid Med Ali at: 11/23/2022 9:34 AM (1 Replies)

11/23/2022 9:34 AM	Rate (0)
Abid Med Ali Member Joined: 11/12/2021 Last visit: 10/30/2023 Posts: 4 Rating: (0)	Hi, Thanks for time and for help, [snip] i have one more question , how to link the iot2050 to the Internet and to the PLC? ------------------------------------------------------------------------------------------ Split from Remote access with Putty SSH Connection.
	Last edited by: Jen_Moderator at: 11/23/2022 12:25:51 New subject after splitting. Division of questions into separate topics.
Suggestion To thank Quote Answer

11/23/2022 2:39 PM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 12/4/2023 Posts: 3295 Rating: (368)	Hi, there is several ways. The most easiest: Use X1P1 with 192.168.200.1 to connec the IOT2050 to your PC and the PLC. Therefore you either need a switch or use a PLC with a switch-port Use X1P2 to connect to a router - this interface is set to dhcp, so this should work by plug&play You could also connect PC, PLC and IOT2050 to your router and set everything to dhcp (S7-1500 PLCs support that from V2.9). If your PLC does not support it you can also set it to use static IP address in the IP subnet of your router. Best regards!

Suggestion To thank Quote Answer