Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to lock a part programs individual lines

Created by: naren1983 at: 9/27/2012 4:59 PM (6 Replies)

Rating (1)

Thanks 2

7 Entries

9/27/2012 4:59 PM	Rate (0)
naren1983 Posts: 1 Rating: (0)	Dear all, I've a cnc sinumerik-840D & 810D with PCU20. I tried to lock the individual part program line also the whole program. But as we don't have the protection level key i'm help less. Please guide me regarding the above...
naren1983 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users narendrakumar

9/28/2012 9:38 PM	Rate (1)
MBA Gold Member Joined: 3/19/2006 Last visit: 4/29/2024 Posts: 594 Rating: (78)	lock a line in NC Program ;RO hide a line in NC Program ;RH

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users narendrakumar

9/29/2012 11:41 AM	Rate (0)
narendrakumar Posts: 10 Rating: (0)	Dear MBA, Thanks you verymuch.i'll check it up and get you back....
narendrakumar Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

9/29/2012 1:05 PM	Rate (0)
narendrakumar Posts: 10 Rating: (0)	Dear MBA, I've checked and it works. But what i suppose to do for unlock it? because when i tried to unlock it by deleting the ;RO there is a message pops-up that access to write is protected. Please guide me.... Thanks you....
narendrakumar Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

9/29/2012 5:20 PM	Rate (0)
MBA Gold Member Joined: 3/19/2006 Last visit: 4/29/2024 Posts: 594 Rating: (78)	narendrakumar Dear MBA, I've checked and it works. But what i suppose to do for unlock it? ofline edit or set manufact password

Suggestion To thank Quote Answer

10/3/2012 10:11 AM	Rate (0)
narendrakumar Posts: 10 Rating: (0)	Dear MBA, I've checked and found part program getting locked on the 840D screen.But i also use HT6(hand held terminal 6). The program line is locked.but in the case of the whole program locking through MD and kept even key position-0,the program is getting edited in HT6.i've even programmed key position 0 in PLC also it is getting edited through HT6. Please help meeeee.... I need the part program should not be edited from HT6.
narendrakumar Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

10/17/2012 6:02 PM	Rate (0)
narendrakumar Posts: 10 Rating: (0)	i have checked but it is only getting locked by ;RO. Through m/c data or diplay data it is getting locked from the 840D screen,but it let to change the part program through HT6. anyway my purpose is solved. Thanks MBA.
narendrakumar Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on