Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to Manually add/Link Module and Channel Drivers

Created by: AL81@lit at: 7/11/2012 12:05 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/11/2012 12:05 PM	Rate (0)
AL81@lit Posts: 26 Rating: (0)	Hi All, I have a non-siemens Failsafe DP Slave on a PCS7 7.1 SP3 system im developing. When i add my channel driver F_CH_BI and F_CH_II and compile with generate module drivers I get an error about hardware being missing and the F_PS_12 module driver block is not added or connected to my channel driver - I guess since the failsafe DP slave is non-siemens the module driver does not recognise it- I believe the way forward is to manually add the F_PS_12 module driver and link it to my channel drivers - can anyone give me a list of things that need connected, or a guide to manually added module drivers ?
AL81@lit Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

7/12/2012 11:47 AM	Rate (0)
Oreca Platinum Expert Joined: 3/14/2008 Last visit: 1/14/2025 Posts: 2158 Rating: (971)	I think you need the GSD file....
	If I could help you, you can use the RATE button. Thank you. Prospact Netherlands...your PCS7 and PCS neo Expert Topic: PCS7 Complete Overview
Suggestion To thank Quote Answer

7/31/2012 10:10 PM	Rate (0)
AL81@lit Posts: 26 Rating: (0)	Do you know where i can find info on modifying the GSD file in order to allow automatic connection of module/channel drivers ? Im asking from a device manufacturer point of view - i.e I need to develop the GSD file
AL81@lit Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

8/2/2012 10:47 PM	Rate (0)
Ssc_Mikro Posts: 196 Rating: (12)	Hi If you have a Profibus component that is not support by the channel drivers, you should use the system function SFB54 to detect if there is any error attach to the Profibus node and then take the precautions you want.
Ssc_Mikro Posts: 196 Rating: (12)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on