Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to migrate from Portal V13 downward to Portal V11

Created by: Import-User-1 at: 6/25/2014 4:30 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

6/25/2014 4:30 PM	Rate (0)
Import-User-1 Posts: 3609 Rating: (28)	Import of a technical questionfrom the user LaraCroft LaraCroft Hi I am now using Portal V13 (Step7 Professional and WinCC Professional) and I will like to know how to migrate one of my project created on Portal V13 downward to Portal V11 for one of my customers that he only have Portal V11.
Import-User-1 Posts: 3609 Rating: (28)
Suggestion To thank Quote Answer

6/25/2014 5:13 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/9/2023 Posts: 13994 Rating: (2282)	For a quick test, I just opened up V13 and V12, entered some simple logic in V13, then copied the LADder network and pasted into V12. So, copy and paste as much as you can, then manually change as required. Keep in mind, a lot of the newer hardware is not supported in V11.
	science guy
Suggestion To thank Quote Answer

6/25/2014 10:13 PM	Rate (0)
William_B Posts: 5225 Rating: (1182)	TIA 13 >> TIA 11... why? If it is a client requirement.. could we PLEASE burn him a demo CD of TIA 13. This version has a few refinements which I personally like.. maybe the client can be confinced to upgrade. Which PLC system is envolved in this? Probably if it is S7-300 / 400 an text export can be considered.
William_B Posts: 5225 Rating: (1182)	Last edited by: William B. at: 6/25/2014 10:16 PM
Suggestion To thank Quote Answer

6/26/2014 9:07 AM	Rate (0)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (168)	I would NEVER suggest going back to V11 as there were several improvements on stability, project health etc which should convince your customer to use V13.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

8/2/2014 3:56 PM	Rate (0)
LaraCroft Posts: 60 Rating: (1)	I try to copy some network from V13 an paste it into V11. But the paste option is not available. May be it work with v12 but not with v11.
LaraCroft Posts: 60 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on