Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to open "Port" via X130 in 840Dsl

Created by: worldleader at: 6/25/2013 4:43 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/25/2013 4:43 AM	Rate (0)
worldleader Posts: 22 Rating: (1)	Hello, everybody~ I want to know how to open the Port of external IP(x130). I already realized changing External IP with SC command and also could access to it with openport command via telnet. But as you know, SC OPENPORT TCP/XXX means that I can't access to NCU via X130 terminal longer after a few minute... So, I need a new solution that I can access toNCU via X130 forever. Please let me know how~ thanks.. p.s - my system is SIN840Dsl/NCU720.2 And I dont want to hear that trythis with your x120 or x127!!^^
worldleader Posts: 22 Rating: (1)
Suggestion To thank Quote Answer

6/25/2013 5:36 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	worldleader Hello, everybody~ I want to know how to open the Port of external IP(x130). I already realized changing External IP with SC command and also could access to it with openport command via telnet. But as you know, SC OPENPORT TCP/XXX means that I can't access to NCU via X130 terminal longer after a few minute... So, I need a new solution that I can access toNCU via X130 forever. Please let me know how~ thanks.. p.s - my system is SIN840Dsl/NCU720.2 And I dont want to hear that trythis with your x120 or x127!!^^ Hello, I Hope you have checked this FAQ. http://support.automation.siemens.com/WW/view/en/59715134 Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on