Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to open TIA V11 SP2 project in TIA V12

Created by: s_vb at: 8/16/2013 9:09 PM (10 Replies)

Rating (1)

Thanks 3

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

8/16/2013 9:09 PM	Rate (0)
s_vb Bronze Member Joined: 10/24/2011 Last visit: 3/9/2023 Posts: 257 Rating: (1)	Hello Everyone, I am using TIA portal V12. I got program which is created in TIA portal V11 SP2. Can I open this backup in V12 version? Is it possible? Thanks in Advance. Regards, Shailesh

Suggestion To thank Quote Answer

8/16/2013 9:31 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/15/2025 Posts: 4393 Rating: (1463)	Hi, The TIA Portal V12 can open and work with V11 project.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

8/16/2013 10:09 PM	Rate (0)
s_vb Bronze Member Joined: 10/24/2011 Last visit: 3/9/2023 Posts: 257 Rating: (1)	Hi Pegaia, Thanks. Yup it works. But when I opened the project, I got eror Network 1,An internal error has occurred. Please contact SIMATIC Customer Support.,1,0,12:58:14 AM Network 1,An internal error has occurred. Please contact SIMATIC Customer Support.,1,0,12:58:14 AM and so on.... i am not able to upload image cause of site server problem. But when select that bit and press enter, red mark gets removed. What is the solution for this or I have to go each bit and do above same procedure? Thanks, Shailesh
	Last edited by: s_vb at: 8/16/2013 10:10 PM
Suggestion To thank Quote Answer

8/17/2013 4:30 AM	Rate (0)
Berg Silver Member Joined: 1/17/2006 Last visit: 1/14/2025 Posts: 554 Rating: (29)	s_vb Hi Pegaia, Thanks. Yup it works. But when I opened the project, I got eror Network 1,An internal error has occurred. Please contact SIMATIC Customer Support.,1,0,12:58:14 AM Network 1,An internal error has occurred. Please contact SIMATIC Customer Support.,1,0,12:58:14 AM and so on.... i am not able to upload image cause of site server problem. But when select that bit and press enter, red mark gets removed. What is the solution for this or I have to go each bit and do above same procedure? Thanks, Shailesh Have you tried the button "Compile" ?
	"Educate the children and it won't be necessary to punish the men." Pythagoras
Suggestion To thank Quote Answer

8/17/2013 10:06 AM	Rate (0)
s_vb Bronze Member Joined: 10/24/2011 Last visit: 3/9/2023 Posts: 257 Rating: (1)	Hi, Yes tried Compile option. Also I tried Rebuilt option. But before Rebuilt there were 27 errors and after Rebuilt I got 643 errors. But as I go to that bit and reenter same again error get removed. PFA image for the same error. Thanks, Shailesh Attachment TIA V12 error.jpg (397 Downloads)

Suggestion To thank Quote Answer

8/17/2013 8:04 PM	Rate (0)
Berg Silver Member Joined: 1/17/2006 Last visit: 1/14/2025 Posts: 554 Rating: (29)	s_vb Hi, Yes tried Compile option. Also I tried Rebuilt option. But before Rebuilt there were 27 errors and after Rebuilt I got 643 errors. But as I go to that bit and reenter same again error get removed. PFA image for the same error. Thanks, Shailesh Hi. I've had such a problem and the option "Compile" only corrected these errors (in red) when I'd select first DB that was in error and then pressed the button "Compile". The compile option did not work if the object was not previously selected (I don't know why). You can try it or upload the program to see if I can help, ok? regards.
	"Educate the children and it won't be necessary to punish the men." Pythagoras
Suggestion To thank Quote Answer

8/19/2013 10:21 AM	Rate (0)
s_vb Bronze Member Joined: 10/24/2011 Last visit: 3/9/2023 Posts: 257 Rating: (1)	Hi, Please find the attached backup. Thanks, Shailesh Attachment CLEANSEP_13813_FINAL.zip (410 Downloads)

Suggestion To thank Quote Answer

8/20/2013 7:09 AM	Rate (0)
Berg Silver Member Joined: 1/17/2006 Last visit: 1/14/2025 Posts: 554 Rating: (29)	s_vb Hi, Please find the attached backup. Thanks, Shailesh Hi. Attached the corrected file without any error. Best regards. Attachment CLEANSEP_13813_FINAL_CHANGED.zip (370 Downloads)
	"Educate the children and it won't be necessary to punish the men." Pythagoras
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users s_vb

8/20/2013 8:02 AM	Rate (0)
s_vb Bronze Member Joined: 10/24/2011 Last visit: 3/9/2023 Posts: 257 Rating: (1)	Hi Berg, Thank you sooooooo much. Can I know where I went wrong? So that in future if this happens again I will take corrective actions. Thanks Shailesh
	Last edited by: s_vb at: 8/20/2013 8:09 AM
Suggestion To thank Quote Answer

8/20/2013 4:00 PM	Rate (1)
Berg Silver Member Joined: 1/17/2006 Last visit: 1/14/2025 Posts: 554 Rating: (29)	s_vb Hi Berg, Thank you sooooooo much. Can I know where I went wrong? So that in future if this happens again I will take corrective actions. Thanks Shailesh Hi. Yes, of couse I can tell... I can not say what caused the problem, things of TIA Portal (unfinished) ! What I did was copy all the networks to another temporary FC and then copy them back to the original location with Ctrl C + Ctrl V. Bes regards.
	"Educate the children and it won't be necessary to punish the men." Pythagoras
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users s_vb

|

Share this page:

Share this page on...

Follow us on