Navigation

How to prevent that the PLC going to stop mode?

Created by: DSmith95966 at: 5/19/2023 9:07 PM (1 Replies)

5/19/2023 9:07 PM	Rate (0)
DSmith95966 Joined: 3/27/2023 Last visit: 5/20/2023 Posts: 1 Rating: (0)	What can we do to prevent the PLC from going to stop mode? ------------------------------------------------------------------------------------------ Split from PLC switching from RUN mode to STOP
	Last edited by: Jen_Moderator at: 05/22/2023 12:05:08 New subject after splitting.
Suggestion To thank Quote Answer

5/19/2023 11:28 PM	Rate (1)
0_Einstein Diamond Member Joined: 7/7/2010 Last visit: 9/18/2024 Posts: 15204 Rating: (2417)	Depends on the system the PLC is controlling. In some cases, it is essential or the correct solution to have the PLC go to stop mode in certain situations. In cases where the PLC programmer has accepted the responsibility of handling errors correctly, there are OBs you can create to detect and handle errors. What is the reason the PLC is stopping that is an acceptable problem? Or, is it more important to smoothly shutdown the system in the event of a hardware failure or software (programming error)? DSmith95966 What can we do to prevent the PLC from going to stop mode?
	science guy
Suggestion To thank Quote Answer