Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to read analog input via plc

Created by: ŠΜS at: 12/5/2010 4:09 PM (4 Replies)

Rating (1)

Thanks 2

5 Entries

12/5/2010 4:09 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 2/3/2023 Posts: 569 Rating: (37)	Dear Sir, I am using Analog Input module to sence the thermister temperature of hydrostatic tank. I need to know how to read the temperature in PLC & display in the Screen.My system is 840D,PCU50.3.
	Regards, ŠΜS
Suggestion To thank Quote Answer

12/5/2010 6:10 PM	Rate (1)
Ekalavya Posts: 2964 Rating: (473)	Hello.... I have attached an example for reading the analog input and output.... check it out....hope this will helps you.... Regards, Ekalavya Attachment analog input in PLC.pdf (979 Downloads)
Ekalavya Posts: 2964 Rating: (473)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users mircoaie3 ŠΜS

12/6/2010 6:25 AM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 2/3/2023 Posts: 569 Rating: (37)	Hi, Sorry I Can’t able to understand.I am using 6ES7331-7PF11-0AB0, SM331 with 8AI.
	Regards, ŠΜS
Suggestion To thank Quote Answer

12/6/2010 5:17 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (473)	Hello.. The module what your using is Thermocouple module....The PDF what i have attached is just an example where you cansee the analog input and output how it written in the part program. What your exactly look for...Could you come in detail? Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (473)
Suggestion To thank Quote Answer

12/7/2010 3:52 AM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 2/3/2023 Posts: 569 Rating: (37)	Hello.. The module what your using is Thermocouple module....The PDF what i have attached is just an example where you cansee the analog input and output how it written in the part program. What your exactly look for...Could you come in detail? Hi, My application is to adjust the speed of the VFD drive by giving 3 digital input ( Like Fixed speed ). That speed is depends upon the Sencing of the Temperature of Spindle oil.I need to write in PLC at fixed 3 temperature theDigital output should come & that temperature should also display in the screen ( 840D,PCU50.3 ).I am using thermocouple. VFD drive is used tovary theflow of the spindle oilinto the RAM.
	Regards, ŠΜS
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on