Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to read R Parameters in WinnCC Flex

Created by: Muthukumar at: 4/27/2012 1:57 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

4/27/2012 1:57 PM	Rate (0)
Muthukumar Posts: 15 Rating: (0)	Hi, I am commissioning 840D in a machine, in which customer needs some special screens. for tht i have opted for Sinumerik HMI Comfiguration Package WinCC Flex 2008. I have installed it in PCU50 and linked with soft key. I am able to read the PLC bits in tht. Now i need to read and write some R parameters WinCC Flex. Now wat i did is I have read the R parameters through NC Var and saved those vales in some memory. i have read that memoris in WinCC Flex. Is there any direct method to read R parameters in WinCC Flex. Tnanks.... muthukumar
Muthukumar Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

4/30/2012 10:56 AM	Rate (0)
RAM81 Silver Member Joined: 3/3/2008 Last visit: 10/5/2023 Posts: 333 Rating: (52)	hi i belive the method you have opted using NC Var is the only solution, regards Ram

Suggestion To thank Quote Answer

5/4/2012 10:41 AM	Rate (1)
vki Posts: 63 Rating: (3)	If you are using Wincc flexible 2008 u can install option sinumerik package supplied by siemens to access the nc variable sin wincc runtime.Else as ram said use nc var
vki Posts: 63 Rating: (3)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ekalavya

|

Share this page:

Share this page on...

Follow us on