Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to see SETAL in PLC

Created by: DennisR at: 1/27/2014 7:23 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

1/27/2014 7:23 PM	Rate (0)
DennisR Posts: 2 Rating: (0)	If in the NC program I issue a SETAL(65000). Is it possible to see a bit in the PLC change in response to the NC command? Is there a list of bits that correspond to the alarm list 65000-69999?
DennisR Posts: 2 Rating: (0)	Last edited by: DennisR at: 1/27/2014 7:26 PM Last edited by: DennisR at: 1/27/2014 7:25 PM
Suggestion To thank Quote Answer

1/30/2014 1:47 AM	Rate (0)
Dj_AT Posts: 3 Rating: (0)	What´s CNC?
Dj_AT Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

1/31/2014 9:15 AM	Rate (0)
MBA Gold Member Joined: 3/19/2006 Last visit: 12/7/2022 Posts: 594 Rating: (78)	DennisR If in the NC program I issue a SETAL(65000). Is it possible to see a bit in the PLC change in response to the NC command? DB10.DBX109.0 NC arlam is active DB21.DBX36.7 NC arlam is active with processing stop DB21.DBX36.6Chanel specific NC arlam is active DennisR Is there a list of bits that correspond to the alarm list 65000-69999? no

Suggestion To thank Quote Answer

1/31/2014 12:13 PM	Rate (0)
DennisR Posts: 2 Rating: (0)	Thanks. This will be helpful. Will use it today.
DennisR Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

1/31/2014 4:27 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (702)	Dj_AT What´s CNC? Computer numerical control Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

2/1/2014 10:40 AM	Rate (0)
MBA Gold Member Joined: 3/19/2006 Last visit: 12/7/2022 Posts: 594 Rating: (78)	Marcjan Dj_AT What´s CNC? Computer numerical control Marcjan I could resist to make this remark

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on