Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to select plc .for a project?

Created by: Yuvaraj Alagarswamy at: 11/24/2013 1:29 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/24/2013 1:29 PM	Rate (0)
Yuvaraj Alagarswamy Posts: 3 Rating: (0)	hai , how to select plc .for a project to SELECT PREFECT PLC TO THAT APPLICATION .WHICH PLC IS BEST' my requiredment is: plc with 56DIs and 64DOs REDUNDANCY support. in hot redundancy which plc want to select.in cold redundancy which plc want to select for this which plc can i select hmi: hmi with 1000 line of alarms bachup with real time clock and delay entries required 82 nos with description. plz helpmeplease giv me ur support
Yuvaraj Alagarswamy Posts: 3 Rating: (0)	Last edited by: O_Moderator at: 11/25/2013 11:23 AM new subject after splitting from /tf/WW/en/Posts/33985#top
Suggestion To thank Quote Answer

11/25/2013 7:49 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 10/8/2024 Posts: 4620 Rating: (708)	Hi sudheer.sodima, If you want PLC with redundancy take a look: SIMATIC S7-300/S7-400 Software redundancy for SIMATIC S7 SIMATIC HMI Basic Panels - Operator devices - Siemens SIMATIC HMI Comfort Panels - Operator devices - Siemens

Suggestion To thank Quote Answer

11/26/2013 5:16 AM	Rate (0)
Nelliyan randy Posts: 461 Rating: (29)	S7 300 or 1200 would be perfect & What about using wincc scada instead of panel. Regards, Nelliyan.G
Nelliyan randy Posts: 461 Rating: (29)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on