Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to set "Triggers an Action" default activated

Created by: rppr at: 4/21/2008 9:14 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/21/2008 9:14 PM	Rate (0)
rppr Advanced Member Joined: 12/31/2007 Last visit: 8/28/2024 Posts: 3 Rating: (0)	Hi all, Is there an expert who knows how te set "triggers an Action" default always activated when genearated a new message. I wan't to generate alarmmessage inaintegratedstep7/wincc projectso that everygenerated message has the value "triggers on action" on true. I try to change it in the excel "configuration tool" in the tab "ALG_Default_Value's" but nothing happens,I can't write it back to wincc did I do someting wrong?

Suggestion To thank Quote Answer

4/22/2008 3:54 PM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	Hi, Never tried to accomplisch that but a work around could be to 1.create your alarms, 2.change one 'triggers an action', 3.export your alarms to csv 4. change all alarms to match the first one for 'triggers an action' number.5. import and overwrite all alarms. with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

4/25/2008 9:43 PM	Rate (0)
rppr Advanced Member Joined: 12/31/2007 Last visit: 8/28/2024 Posts: 3 Rating: (0)	Hi, Alarm list export/import is not a option because evertime you do a "Entire" compile action thesettings are lost! Just looking for another solution. with regards, rppr

Suggestion To thank Quote Answer

4/28/2008 8:55 AM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	I'm sorry I don't know of any other way. You could contact service by means of a support request if nobodyelse replies. with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on