Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to take 0 to 10vdc as analog output from sinamics v20?

Created by: Prabhjot Singh at: 6/16/2018 6:49 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/16/2018 6:49 PM	Rate (0)
Prabhjot Singh Posts: 1 Rating: (0)	How to take 0 to 10vdc as analog output from sinamics v20 vfd instead of mAmps ------------------------------------------------------------------------------------------ Split from Changing analog output function of Sinamics V20.
Prabhjot Singh Posts: 1 Rating: (0)	Last edited by: Jen_Moderator at: 6/18/2018 12:51:58 PM New subject after splitting
Suggestion To thank Quote Answer

6/17/2018 5:23 AM	Rate (0)
PISCEAN 2010 Diamond Member Joined: 4/23/2010 Last visit: 11/23/2024 Posts: 8092 Rating: (878)	Hello, Connect 500 Ohm, 1 watt resistor across AO1 i.e. terminal 4 & 5, set the output scale range as 0-20 mA. Across resistor 500 Ohm you will get 0-10 Volt proportinate tp 0-20 mA. HTH.

Suggestion To thank Quote Answer

6/18/2018 1:53 PM	Rate (0)
KFoldesi Silver Member Joined: 9/8/2011 Last visit: 8/7/2024 Posts: 537 Rating: (88)	Also, consider using a precision resistor for this job.
	A smart person learns from their mistakes A wise person learns from others mistakes
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on