Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to Upload/Transfer logic from LOGO OBA6 to PC using comfort v8

Created by: aliraza at: 12/5/2015 8:04 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/5/2015 8:04 PM	Rate (0)
aliraza Posts: 7 Rating: (0)	Can anyone please tell me how to upload logic from OBA6 controller to Logo Software version 8. I am unable to LOGO OBA6 in "Add New Device" option in "Network View".
aliraza Posts: 7 Rating: (0)
Suggestion To thank

12/5/2015 8:40 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/14/2024 Posts: 34418 Rating: (4289)	In network mode, there is no 0BA0 - 0BA6. Only the 0BA7 and 0BA8 are networkable.

Suggestion To thank

12/7/2015 10:30 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	Closed cause question posted twice. The second thread with the subject Unable to find Logo 0BA6 in Hadware catalog of LOGO soft comfort v8 is published within the conference LOGO!. Best regards Min_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on