Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to use CU320-2PN/DP control S120 ?

Created by: vorapob at: 10/7/2020 5:02 PM (7 Replies)

Rating (3)

Thanks 0

8 Entries

10/7/2020 5:02 PM	Rate (0)
vorapob Gold Member Joined: 1/17/2013 Last visit: 2/4/2023 Posts: 990 Rating: (5)	Dear Experts, I want to know about S120 control. I just only have 1.PLC S7-315-2PN/DP, 2.CU320-2PN/DP , 3.Double Motor module, 4.Servo motor, 5. 1 motor cable and 6.motor encoder cable with Drive CLiQ. What anything I have to buy more ? How I can use these equipment to control motor for speed and position control ? Best Regards, Vorapob
	Best Regards, Vorapob
Suggestion To thank Quote Answer

10/7/2020 5:42 PM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/6/2023 Posts: 21222 Rating: (2798)	hello, you need also a infeed. and a CF Card with FW for the CU interconnect this components configure it in Starter and download the config. Regards Christoph

Suggestion To thank Quote Answer

10/8/2020 8:10 AM	Rate (0)
vorapob Gold Member Joined: 1/17/2013 Last visit: 2/4/2023 Posts: 990 Rating: (5)	ChristophD hello, you need also a infeed. and a CF Card with FW for the CU interconnect this components configure it in Starter and download the config. Regards Christoph Dear Christoph, Which infeed type I should use in this system ? Best Regards, Vorapob
	Best Regards, Vorapob
Suggestion To thank Quote Answer

10/8/2020 8:22 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/6/2023 Posts: 21222 Rating: (2798)	Hi, the one you need , most a slm. this depends which motormodules and motors you use.

Suggestion To thank Quote Answer

10/8/2020 5:10 PM	Rate (0)
vorapob Gold Member Joined: 1/17/2013 Last visit: 2/4/2023 Posts: 990 Rating: (5)	ChristophD Hi, the one you need , most a slm. this depends which motormodules and motors you use. Dear Christoph, "depends which motormodules and motors you use." Basic Line, Smart Line and Active Line module. How can I know which infeed I should use with single and double module and which motor type ? Best Regards, Vorapob
	Best Regards, Vorapob
Suggestion To thank Quote Answer

10/8/2020 8:21 PM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/6/2023 Posts: 21222 Rating: (2798)	you can use the drive technology configurator or Sizer to config the system, they also will select the correct needed components https://mall.industry.siemens.com/spice/jom/jom/

Suggestion To thank Quote Answer

10/9/2020 10:54 AM	Rate (0)
vorapob Gold Member Joined: 1/17/2013 Last visit: 2/4/2023 Posts: 990 Rating: (5)	ChristophD you can use the drive technology configurator or Sizer to config the system, they also will select the correct needed components https://mall.industry.siemens.com/spice/jom/jom/ Dear Christoph, I can't open this website. Can you send me again please ? Best Regards, Vorapob
	Best Regards, Vorapob
Suggestion To thank Quote Answer

10/9/2020 11:28 AM	Rate (1)
PISCEAN 2010 Diamond Member Joined: 4/23/2010 Last visit: 1/29/2023 Posts: 7962 Rating: (844)	vorapob ChristophD you can use the drive technology configurator or Sizer to config the system, they also will select the correct needed components https://mall.industry.siemens.com/spice/jom/jom/ Dear Christoph, I can't open this website. Can you send me again please ? Best Regards, Vorapob Hello, You can try this. or without login/registration this. Attachment DT-C.jpg (22 Downloads)
	Last edited by: PISCEAN 2010 at: 10/09/2020 11:30:13
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on