How to use MUX for Elapsed Time.

Hello all,

I have 10 seq. I need to show in a single display the elapsed time of each SEQ. 

I have written a logic for it using MUX . It is compiled and downloaded but it doesn't return any value.

Can anyone please let me why this thing is happening.

/////////Logic

ODP1_Time(IN := ODP_1.AutoSeqStart.Q1   ,PT := HMI_IO.TimeSetting.TotalTime);//Ton

ODP2_Time(IN := ODP_2.AutoSeqStart.Q1   ,PT := HMI_IO.TimeSetting.TotalTime);//Ton

ODP3_Time(IN := ODP_3.AutoSeqStart.Q1   ,PT := HMI_IO.TimeSetting.TotalTime);//Ton

ODP4_Time(IN := ODP_4.AutoSeqStart.Q1   ,PT := HMI_IO.TimeSetting.TotalTime);//Ton

ODP5_Time(IN := ODP_5.AutoSeqStart.Q1   ,PT := HMI_IO.TimeSetting.TotalTime);//Ton

ODP6_Time(IN := ODP_6.AutoSeqStart.Q1   ,PT := HMI_IO.TimeSetting.TotalTime);//Ton

ODP7_Time(IN := ODP_7.AutoSeqStart.Q1   ,PT := HMI_IO.TimeSetting.TotalTime);//Ton

ODP8_Time(IN := ODP_8.AutoSeqStart.Q1   ,PT := HMI_IO.TimeSetting.TotalTime);//Ton

ODP9_Time(IN := ODP_9.AutoSeqStart.Q1   ,PT := HMI_IO.TimeSetting.TotalTime);//Ton

ODP10_Time(IN := ODP_10.AutoSeqStart.Q1   ,PT := HMI_IO.TimeSetting.TotalTime);//Ton

IF ODP_1.AutoSeqStart.Q1 THEN ODP_No:=1;END_IF;

IF ODP_2.AutoSeqStart.Q1 THEN ODP_No:=2;END_IF;

IF ODP_3.AutoSeqStart.Q1 THEN ODP_No:=3;END_IF;

IF ODP_4.AutoSeqStart.Q1 THEN ODP_No:=4;END_IF;

IF ODP_5.AutoSeqStart.Q1 THEN ODP_No:=5;END_IF;

IF ODP_6.AutoSeqStart.Q1 THEN ODP_No:=6;END_IF;

IF ODP_7.AutoSeqStart.Q1 THEN ODP_No:=7;END_IF;

IF ODP_8.AutoSeqStart.Q1 THEN ODP_No:=8;END_IF;

IF ODP_9.AutoSeqStart.Q1 THEN ODP_No:=9;END_IF;

IF ODP_10.AutoSeqStart.Q1 THEN ODP_No:=10;END_IF;

HMI_IO.TimeSetting.ElapsedTime:= MUX (K:= ODP_No,  IN0:=ODP1_Time.ET,  IN1:=ODP2_Time.ET ,IN2:=ODP3_Time.ET,  IN3:=ODP4_Time.ET,  IN4:=ODP5_Time.ET,   IN5:=ODP6_Time.ET ,IN6:=ODP7_Time.ET,IN7:=ODP8_Time.ET,IN8:=ODP9_Time.ET,IN9:=ODP10_Time.ET,INELSE:=T#0s) ;

 Also tell me if this can be done otherways.

Regards,

Prayag 

Hello,

IN0: was connected to 1 hence was not working.

Hi

You could assign HMI value in the IF instruction itself.

Regards

Piotr