How to use SW_CAM

Is anybody kind enough to tell me how to use SW_CAM.

That's what i have done,but failed.

1.setMD 10450[0]=1;
MD 10450[1]=2;
2.set SD 41500[0]=1200;
SD 41501[0]=1000;
3.active SW_CAM
AM0.1//always one.
=DB31.DBX2.0
Then I look for the result of DB10.DBX110.0 and DB10.DBX114.0.
But however I travel the X axis,both of the two signals keep 0.

Wassomething important missed?

Look forward to your responseding.

Hi Liangjingli - I know it's been a long, long time, but did you ever find a solution to your software cam issue.  I'm trying to use the cam signals for a sensor and I'm stuck in exactly the same place you were.  Did you ever get it to work?

Mostly, you will need to pair your setting with axis.

It could be done in parameter MD 10450 SW_CAM_ASSIGN_TAB.

Example:

SW_CAM_ASSIGN_TAB[n]= <number of axis>

n - is pair number from 0..n.

Hi,

If you already have activated the SW_CAM option, after you set DB31.DBX2.0, you should checkout DB31.DBX62.0.

And you also should configure N10450/N41500/N41501.

If you configured N10450[0] as 1,  you should set N41500[0] and N41501[0].