Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to use the signal with tool status to interelation with the PART Progm

Created by: H.J.R at: 7/6/2013 6:30 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/6/2013 6:30 AM	Rate (0)
H.J.R Experienced Member Joined: 3/21/2012 Last visit: 1/17/2022 Posts: 129 Rating: (0)	Dear sir, In ATC, iam using a 6 tool stations using 6 proximity sensors to know the tool status given to plc,but How to use these signal to interelation with the PART Progm. How to move the signal in to a $A_DBB[x]. i want to know the Data Blocks in part program like $A_DBB[1],[2],[3]...[12] I DIDN'T understand the data blocks. please help me sir...i searched in DOCON_CD also. i didn't get the solution....plzzzzzzz
	Last edited by: CS Moderator at: 7/7/2013 8:55 AM new subject after splitting from /tf/WW/en/Posts/93177#top
Suggestion To thank

7/7/2013 9:56 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 3/23/2023 Posts: 4099 Rating: (192)	closed cause question posted twice. The second thread with the subject Data blocks in part program in atc program in 828D is published within the same conference. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on