Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Hresult 0x80070040

Created by: Marques at: 12/7/2007 11:33 AM (7 Replies)

Rating (0)

Thanks 0

8 Entries

12/7/2007 11:33 AM	Rate (0)
Marques Posts: 126 Rating: (2)	When I try to start an Wincc 6.0 project i get the next message and can´t open the project: Hresult 0x80070040: The specified network name is no longer available. I have Wincc 6.0 SP4 in a Windowns XP Pro SP2. How do I solve this problem. I have already seen in FAQs and hotline search but can´t find this error. Regards, Marques
Marques Posts: 126 Rating: (2)	Last edited by: Marques at: 07.12.2007 11:34
Suggestion To thank Quote Answer

12/7/2007 11:47 AM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, Do you have a network communication processor installed on that computer? You must have one... Has WinCC ever worked on that computer? If not, it hasn't been installed while in a domain, right? Does that happen to all projects? Can you create a new one? Have you installed / uninstalled any communication processor or software? Best regards, Danielle
Danielle Posts: 1275 Rating: (123)	Last edited by: Danielle at: 07.12.2007 11:48
Suggestion To thank Quote Answer

12/7/2007 12:05 PM	Rate (0)
Marques Posts: 126 Rating: (2)	Hi I have Simatic Net installed, and Wincc was working fine, but now i can notopen any project.If i try to make a new project the same message appears. I recently made a recovery off the Windows XP using the Console of Windows, but i have alrready worked with Wincc 6.0 after that. Regards, Marques
Marques Posts: 126 Rating: (2)
Suggestion To thank Quote Answer

12/7/2007 1:16 PM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, Could you post your diagnose folder here? Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

12/10/2007 10:28 AM	Rate (0)
Buzz LightYear Experienced Member Joined: 5/25/2007 Last visit: 11/25/2024 Posts: 83 Rating: (3)	Hi: Try to close fire wall. Withregards Buzz LightYear ANPRO Automation Co. , Ltd TEL：+886-2-29995926 FAX：+886-2-29995929 Mobile Phone：+886-932018640 E-Mail Address： <mailto:vincentchang@anpro.com.tw> 5F/9,NO.14,Lane 609,Sec.5,Chung Hsin Rd, San Chung City,Taipei County,Taiwan,R.O.C

Suggestion To thank Quote Answer

12/10/2007 8:23 PM	Rate (0)
Marques Posts: 126 Rating: (2)	I have not find what is happning but now i can open the Wincc 6.0 and put the poject in runtime. Anyway i am sending you the diagnose folder in order for you to take a look at. Regards, Marques Attachment Diagnose.zip (134 Downloads)
Marques Posts: 126 Rating: (2)
Suggestion To thank Quote Answer

12/11/2007 12:06 PM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi Marques, Sometimes just rebooting or turning off the computer can do magical things! São as mágicas da informática! hahaha.... Well... here's what I found in your logs: 255,10.12.2007,13:01:49:343,1007005,4,,PC-MARQUES,SCRIPT,Fault in LoadFunktion AcknowledgeMessage error: 'AcknowledgeMessage': doubly defined function There are actually many of these, for pretty much every internal action within WinCC... Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

11/29/2012 3:29 PM	Rate (0)
Katona Posts: 1 Rating: (0)	Hi. How can I delete the doubly defined functions? Thx. Katona
Katona Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Installation Options General

Follow us on