Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

HW configuration

Created by: Thomas P. at: 1/3/2013 9:55 AM (17 Replies)

Rating (1)

Thanks 0

Result pages:: |; 1 | 2; |

18 Entries

Entries per page: 10 | all

1/3/2013 9:55 AM	Rate (0)
Thomas P. Posts: 70 Rating: (0)	Hi, how can I add PG/PC interface (viz. HW configuration.jpg)? Thank you in advance for your answer Attachment HW configuration.jpg (354 Downloads)
Thomas P. Posts: 70 Rating: (0)
Suggestion To thank Quote Answer

1/3/2013 10:56 AM	Rate (1)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/2/2024 Posts: 10229 Rating: (1181)	Are you using Virtual machine? And from there you are trying to connect? The basic rule is: in PG/PC Interface must assign the interface from PC which is/will connected to the CPU. I guess you will use TCP/IP interface. If it is not shown in PG/PC Interfaces you must add it manually...Start the PG/PC Interface and take a look there what kind of options have... best regards, Hristo Mihalev

Suggestion To thank Quote Answer

1/3/2013 12:37 PM	Rate (0)
Thomas P. Posts: 70 Rating: (0)	Quote: Start the PG/PC Interface and take a look there what kind of options have... I can't do it, because I don't have in Tools item Set PG/PC interface (viz. Set_PG_PC_Interface.jpg). Thank you in advance for your answer Attachment Set_PG_PC_Interface.jpg (362 Downloads)
Thomas P. Posts: 70 Rating: (0)
Suggestion To thank Quote Answer

1/3/2013 1:15 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 12/1/2024 Posts: 1523 Rating: (230)	Thomas P. Quote: Start the PG/PC Interface and take a look there what kind of options have... I can't do it, because I don't have in Tools item Set PG/PC interface (viz. Set_PG_PC_Interface.jpg). Thank you in advance for your answer Hello Thomas P, Open the Set PG/PC interface option from your Windows OS Control Panel. Then follow as Hristo Mihalev said.
	Like it? Rate it!
Suggestion To thank Quote Answer

1/3/2013 1:28 PM	Rate (0)
Thomas P. Posts: 70 Rating: (0)	What next (viz. PG_PC_Interface.jpg)? Thank you in advance for your answer Attachment PG_PC_Interface.jpg (370 Downloads)
Thomas P. Posts: 70 Rating: (0)
Suggestion To thank Quote Answer

1/3/2013 2:28 PM	Rate (0)
Thomas P. Posts: 70 Rating: (0)	Edit: I have those connections (viz. PG_PC.jpg). Thank you in advance for your answer Attachment PG_PC.jpg (328 Downloads)
Thomas P. Posts: 70 Rating: (0)
Suggestion To thank Quote Answer

1/3/2013 2:48 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/2/2024 Posts: 10229 Rating: (1181)	Leave to be S7(ONLINE). Then you must select from the list which way will connect to CPU. In your case this will be TCP/IP. So, select TCP/IP -> Network card to which is connected (in case you are not using Virtual machine). If you have VM you must select VMWare Accelerated...according to the setting in Virtual machine... Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

1/3/2013 6:37 PM	Rate (0)
Thomas P. Posts: 70 Rating: (0)	Quote: Are you using Virtual machine? No, I have TIA Portal V11 installed on Microsoft Windows 7 (32 bit). So, I will select PLCSIM.TCPIP.1, that's all? Thank you in advance for your answer
Thomas P. Posts: 70 Rating: (0)
Suggestion To thank Quote Answer

1/3/2013 6:40 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/2/2024 Posts: 10229 Rating: (1181)	Do you want to connect to real CPU or using PLCSIM? In case it is real you must select TCP/IP -> network card. In case 'virtual' PLCSIM TCP/IP -> network card...

Suggestion To thank Quote Answer

1/3/2013 6:55 PM	Rate (0)
Thomas P. Posts: 70 Rating: (0)	Quote: Do you want to connect to real CPU or using PLCSIM? In case 'virtual' PLCSIM TCP/IP -> network card... Real CPU, but I'm right now at home, so I can't do anything (PLC and TIA portal V11 is in the school). Quote: In case it is real you must select TCP/IP -> network card. I may be dumb, but do you mean to open the Control Panel, Network Connections and set it up there? Thank you in advance for your answer
Thomas P. Posts: 70 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on