Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I am facing problem with CP341 can anyone help me?

Created by: Ans at: 9/12/2008 12:32 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/12/2008 12:32 PM	Rate (0)
Ans Posts: 3 Rating: (0)	I am going to use two CP to communicate with CCTV & Intercom individually; I am not getting how to configure both CP 341 using FC 5 & FC 6. Can I call these both FC two time using address of both CP individually? Please help me!
Ans Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

9/12/2008 1:18 PM	Rate (0)
umencho Diamond Expert Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	Ans I am going to use two CP to communicate with CCTV & Intercom individually; I am not getting how to configure both CP 341 using FC 5 & FC 6. Can I call these both FC two time using address of both CP individually? Please help me! Hi You can use FC5 and FC6 two time with putting different address and Nr. of connection. For more details use F1 help FC5 and FC6. And this FAQ will be helpfull: How do you program the communication blocks FC5 and FC6? Sorry, sorry!! Follow legacy support's advice. My is not valid for your CP. I preffer to be delete my answer. Mr. Moderators, please regards
	Last edited by: UMENCHO at: 9/12/2008 2:15 PM
Suggestion To thank Quote Answer

9/12/2008 1:42 PM	Rate (0)
legacy support Silver Member Joined: 7/15/2008 Last visit: 1/21/2025 Posts: 382 Rating: (44)	Hello Ans Please download the Manual for the CP341 . There it will explain you the setup and the communication possbilities for RS422/485 Point to Point Communication with the RK512 ,ASCII or the 3964R protcoll . In Step 7 you have to use FB7or FB8 (CP341) from the Library under CP PtP / CP341. Please see Entry ID : 25074283. Regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on