Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I can not create project on WinCC flexible 2008 SP1

Created by: User_automation at: 8/13/2010 8:02 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

8/13/2010 8:02 AM	Rate (0)
User_automation Posts: 12 Rating: (0)	I can not create project on WinCC flexible 2008 SP1. Please on picture. How to correct it. Splitted from WinCC Flexible 2008 SP1-> SP2 in Virtual PC / XP-SP3 upgrade path. Attachment WinCC2008.JPG (92 Downloads)
User_automation Posts: 12 Rating: (0)	Last edited by: O_Moderator at: 8/16/2010 7:30 AM new subject after splitting
Suggestion To thank Quote Answer

8/13/2010 9:22 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	Hello, What is your OS? Is it possible to open some project? This behavior happened suddenly or after fresh installation of WinCC Flex? Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

4/21/2016 10:08 AM	Rate (0)
User_automation Posts: 12 Rating: (0)	Thank you for your respond. Now I upgrade OS to XP sp3 and upgrade winCC flexible 2008 sp1 to sp3 also. This problem are fixed.
User_automation Posts: 12 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ayman Elotaify

|

Share this page:

Share this page on...

Follow us on