Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I can't stop my Logo! Using the ESC key

Created by: 2700Hp Logo! at: 8/28/2010 7:15 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

8/28/2010 7:15 PM	Rate (0)
2700Hp Logo! Posts: 37 Rating: (0)	Dear experts, Once my logo is programmed I can't stopthe programme executionwith the Esc on the front panel. It will stop if I connect a PC running the Logo!soft Comfort, but not from the front panel. The display will freeze when I press Esc but it carries on running in the background. Press Esc again and normal display operation is resumed. Is my programme preventing the Esc key function (it does use the keys on the keypad during operation)? Or is there a mode I've indavertantly set? TIA I have looked to see if this subject is covered elsewhere but my searches turned up nothing relevant. My apologies if I've just missed it.
2700Hp Logo! Posts: 37 Rating: (0)	Last edited by: 2700Hp Logo! at: 8/28/2010 7:16 PM
Suggestion To thank Quote Answer

8/29/2010 10:41 AM	Rate (1)
Andres [Str] Posts: 153 Rating: (17)	Hi. If you use blocks of text messages in a program code you should by means of the cursor down on the front panel the LOGO pass in the menu of a condition of inputs and outputs. Then to press еsк, to pass in the main menu. I think it to you will help.
Andres [Str] Posts: 153 Rating: (17)
Suggestion To thank Quote Answer

8/29/2010 6:34 PM	Rate (0)
2700Hp Logo! Posts: 37 Rating: (0)	Thanks Andrey. Yes pressing the down cursor key until you get to the Time and Date Display then pressing ESC gets to the right menu to stop the process.
2700Hp Logo! Posts: 37 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on