I have problems connecting S7-1215C to my hardware siwarex WP231 5, fw V3.0.3

 Yo tengo el mismo problema. Espero puedan ayudar.

Chie19

 

Min_Moderator

Nueva pregunta publicada por chie19 se divide a un hilo separado con el tema Use siwarex wp231 directamente conectado a s7-1215c sin siwatool .

Saludos
cordiales Min_Moderator

Tengo problemas para conectar s7-1215C a mi hardware siwarex wp231 5, fw. v 3.0.3. mi tia portal v13 hsp tiene siwarex wp231 v1 sólo si ese es el problema ¿cómo puedo cambiar la versión hsp para que coincida con v 3.0.3?

------------------------------------------------------------------------------------------
Split from link / software siwatool v7 for siwarex wp231?.

Ipanaque

 Yo tengo el mismo problema. Espero puedan ayudar.

Google Translate

I have the same problem. I hope you can help.

Hello Ipanaque,

the official language in this forum is english.
Please write your posts in english. Not everyone speaks your mother tongue.

Google Translate

el idioma oficial en este foro es el inglés.
Por favor, escriba sus mensajes en inglés. No todo el mundo habla su lengua materna.

New question published by Ertek68 is split to a separate thread with the subject Want to get the weight values of two Siwarex connected to one CPU.

Best regards
Jen_Moderator

Hello regards, I was currently working with a PLC s7-1200-1214c AC / DC / Relay together with the siwarex wp231 module, download the file that provides simens "Ready to use" from the following link: 

https://support.industry.siemens.com/cs/document/66825585/tia-portal-project-%E2%80%9Eready_for_use%E2%80%9C-function-block-library-for-siwarex-wp231?dti = 0 & lc = en-WW

I opened the file established the communication between the PLC and the siwarex WP231 module managing to see the weight through an HMI without any problem. The problem arose when trying to connect a PLC 1215 AC/DC/RLY with the same program used with the PLC 1214 , but you can not see the weight through the variable GROSS_NET_WEIGHT located inside the instance block WP231PR_DB. The file that was downloaded is only for the exclusive use of the PLC 1214? If not, could you tell me the modifications that have to be done within the project  "Ready for use" project to work with a 1215 PLC, or is there a "ready for use" one for PLC 1215?  Thank you for help please greetings 

Hello, AutoGen_8739028,

First of all, welcome to the forum.

Here in the international forum of Siemens English is the official language. Please be so kind and write your posts in English, because not everyone in the forum speaks Spanish. Do not speak English, use translators such as Google Translate or other. 

Google Translate

Hello regards, I was currently working with a PLC s7-1200-1214c AC / DC / Relay together with the siwarex wp231 module, download the file that provides simens "Ready to use" from the following link:

https://support.industry.siemens.com/cs/document/66825585/tia-portal-project-%E2%80%9Eready_for_use%E2%80%9C-function-block-library-for-siwarex-wp231?dti= 0 & lc = en-WW

Open the file establish the communication between the PLC and the siwarex wp231 module managing to see the weight through an HMI. The problem arose when trying to connect a PLC 1215 AC / DC / Relay with the software but you can not see the weight through the variable GROSS_NET_WEIGHT located inside the instance block WP231PR_DB. The file that is downloaded is only for the exclusive use of the PLC 1214. If not, could you tell me the modifications should be made within the "Ready to use" project to work with a PLC 1215, or is there a ready to use , for plc 1215?