Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I/O problem on SIMATIC TDC ( SIM 500 module )

Created by: logan at: 10/30/2006 12:49 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/30/2006 12:49 PM	Rate (0)
logan Posts: 8 Rating: (0)	Hi, i've implemented on SIMATIC TDC a CFC code which consist in reading and writing one analog input (real) value via converter, thedifference between input signal and output signal is almost 160 µs . I want to know if all analog inputs are red even if they are not selected because i want to implement a program that reads and write 8 analog inputs via converter whith a conversion time of 40 µs. Is it possible?
logan Posts: 8 Rating: (0)
Suggestion To thank

11/10/2006 9:34 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 12/5/2024 Posts: 4114 Rating: (195)	Closed: cause thread was posted twice. The other thread you can find here: I/O module on TDC (SM 500 ).
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on