Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I tried CP5711 vith Step7 v5.4 SP4 no chance?

Created by: bule at: 11/12/2009 4:14 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/12/2009 4:14 PM	Rate (0)
bule Member Joined: 12/6/2006 Last visit: 10/31/2023 Posts: 5 Rating: (0)	Hello my experiance are folowingf I tried CP5711 vith Step7 v5.4 SP4 no chance. When installed simatic net 2008 sp1 was OK. Yhen i uninstalled simatic net and it was still ok. On VM i installed Step7 v5.4 sp5->not working. After simatic net installation drivers were ok but could not start, I hope something with VM
	Last edited by: O_Moderator at: 11/13/2009 10:08 AM new subject after splitting from /tf/WW/en/Posts/27178#top
Suggestion To thank Quote Answer

11/12/2009 4:53 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, well... which version of VM Ware do you use? Does the Host OS show the CP or is it showing nothing at all? Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on